Search for: All records

Traditional synthetic efforts to prepare Eu(II)-containing oxides have principally involved the use of high temperature reactions starting from EuO or a controlled, highly-reducing, atmosphere. Conversely, chimie douce approaches that are more amenable to the targeted syntheses of new, and potentially metastable, Eu(II)-oxides have yet to be explored. Herein, a cation-exchange route to new Eu(II)-containing oxides, e.g., EuTa4-xO11 (x = 0.04), has been discovered and its structure determined by powder X-ray diffraction (Space group P6322 (#182), a = 6.2539(2) Å; c = 12.3417(2) Å). The compound derives from the cation exchange of Na2Ta4O11, via a reaction with EuBr2 at 1173 K, and replacement by half the number of divalent Eu cations. Rietveld refinements show preferential ordering of the Eu cations over one of the two possible cation sites, i.e., Wyckoff site 2d (~94%; Eu1) versus 2b (~6%; Eu2). Total energy calculations confirm an energetic preference of the Eu cation in the 2d site. Tantalum vacancies of ~1% occur within the layer of Eu cations and TaO6 octahedra, and ~20% partial oxidation of Eu(II) to Eu(III) cations from charge balance considerations. 151Eu M¨ossbauer spectroscopy measured at 78 K found a Eu(II):Eu(III) ratio of 69:31, with a relatively broad line width of the former signal of Γ = 7.6(2) mm s–1. Also, the temperature-dependent magnetic susceptibility could be fitted to a Curie Weiss expression, giving a μeff = 6.2 μB and θCW = 10 K and confirming a mixture of Eu(II)/Eu(III) cations. The optical bandgap of EuTa4-xO11 was found to be ~1.5 eV (indirect), significantly redshifted as compared to ~4.1 eV for Na2Ta4O11. Spin-polarized electronic structure calculations show that this redshift stems from the addition of Eu 4f7 states as a higher-energy valence band. Thus, these results demonstrate a new cation-exchange approach that represents a useful synthetic pathway to new Eu(II)-containing ox- ides for tunable magnetic and optical properties. 

Recently, many new, complex, functional oxides have been discovered with the surprising use of topotactic ion‐exchange reactions on close‐packed structures, such as found for wurtzite, rutile, perovskite, and other structure types. Despite a lack of apparent cation‐diffusion pathways in these structure types, synthetic low‐temperature transformations are possible with the interdiffusion and exchange of functional cations possessing ns²stereoactive lone pairs (e. g., Sn(II)) or unpaired nd^xelectrons (e. g., Co(II)), targeting new and favorable modulations of their electronic, magnetic, or catalytic properties. This enables a synergistic blending of new functionality to an underlying three‐dimensional connectivity, i. e., [‐M−O‐M‐O‐]_n, that is maintained during the transformation. In many cases, this tactic represents the only known pathway to prepare thermodynamically unstable solids that otherwise would commonly decompose by phase segregation, such as that recently applied to the discovery of many new small bandgap semiconductors.

 

Using molten‐salt synthetic techniques, NaNbO₃(Space groupPbcm; No. 57) was prepared in high purity at a reaction time of 12 hours and a temperature of 900°C. All NaNbO₃products were prepared from stoichiometric ratios of Nb₂O₅and Na₂CO₃together with the addition of a salt flux introduced at a 10:1 molar ratio of salt to NaNbO₃, that is, using the Na₂SO₄, NaF, NaCl, and NaBr salts. A solid‐state synthesis was performed in the absence of a molten salt to serve as a control. The reaction products were all found to be phase pure through powder X‐ray diffraction, for example, with refined lattice constants ofa = 5.512(5) Å,b = 5.567(3) Å, andc = 15.516(8) Å from the Na₂SO₄salt reaction. The products were characterized using UV‐Vis diffuse reflectance spectroscopy to have a bandgap size of ~3.5 eV. The particles sizes were analyzed by scanning electron microscopy (SEM) and found to be dependent upon the flux type used, from ~<1 μm to >10 μm in length, with overall surface areas that could be varied from 0.66 m²/g (for NaF) to 1.55 m²/g (for NaBr). Cubic‐shaped particle morphologies were observed for the metal halide salts with the set of exposed (100)/(010)/(001) crystal facets, while a truncated octahedral morphology formed in the sodium sulfate salt reaction with predominantly the set of (110)/(101)/(011) crystal facets. The products were found to be photocatalytically active for hydrogen production under UV‐Vis irradiation, with the aid of a 1 wt% Pt surface cocatalyst. The platinized NaNbO₃particles were suspended in an aqueous 20% methanol solution and irradiated by UV‐Vis light (λ > 230 nm). After 6 hours of irradiation, the average total hydrogen production varied with the particle morphologies and sizes, with 753 µmol for Na₂SO₄, 334 µmol for NaF, 290 µmol for NaCl, 81 µmol for NaBr, and 249 µmol for the solid‐state synthesized NaNbO₃. These trends show a clear relationship to particle sizes, with smaller particles showing higher photocatalytic activity in the order of NaF > NaCl > NaBr. Furthermore, the particle morphologies obtained from the Na₂SO₄flux showed even higher photocatalytic activity, though having a relatively similar overall surface area, owing to the higher activity of the (110) crystal facets. The apparent quantum yield (100 mW/cm²,λ = 230 to 350 nm, pH = 7) was measured to be 3.7% for NaNbO₃prepared using the NaF flux, but this was doubled to 6.8% when prepared using the Na₂SO₄flux. Thus, these results demonstrate the powerful utility of flux synthetic techniques to control particle sizes and to expose higher‐activity crystal facets to boost their photocatalytic activities for molecular hydrogen production.